Contact Us




+61 401 914 496


Online Enquiry

Please call me back
* Required fields

The  ™


Bonetti Campers designed the ™ through hard earned experiences in the Australian Outback and traveling around the globe. ( We also do repairs any pop and flip top roof conversion ). We are focussed to achieve a higher standand vehicle conversion that is currently offered in today's market. 


Our aim was to design and use the highest quality equipment on the best base vehicle available, and build a home for travellers who search for a simple, but comfortable solution that allows quick setup  under any conditions and cirumstances. You will have maximum storage, with a well designed interior, to enjoy the journey and not be hassled with setting up camp. A wide bed with comfortable mattresses is no longer a dream! Everyone deserves a good rest to be fit for the adventures of the next day and the ™ has the biggest bed ever in a Troop Carrier, which boasts a super comfy 1.45x2.10m bed with 10cm thick mattresses.


The ™ can be supllied as a Pop Top Roof only conversion or made as an complete Adventure Camper, ready to travel wherever you wish to. Your vehicle will be fully ADR compliant and engineered and can be certified worldwide.


As everyone has different needs and preferences, your ™ will be manufactured the way YOU need it, we will listen to your needs and wishes and find solutions that suit your application.


Usually the customer supplies their own vehicle, but we are happy to assist with sourcing a suitable vehicle for you. ™ Basic :


- Fiberglass roof conversion with bed system, mattresses, scissors and gas lifters.

  Bed size   1.45x2.10m

- Modified Schnorkel

- ™ decal for hood, roof and sides

- Fitted and certified ™ Adventure Camper Basic

- Fiberglass roof conversion with bed system, mattresses, scissors and gas lifters.

  Bed size   1.45x2.10m,

- Gas lifters for bed base (extra storage)

- Storage pockets in roof collar

- Curtains in living area

- Modified Snorkel

- ™ decal for hood, roof and sides

- CNC cut lightweight poplar plywood cabinetry laminated

- 2 Burner Origo cooker cold water system pressurised, inclusive carbon water filter.

- 75L Fresh water Tanks, can be extended

- Custom made compressor fridge / freezer with double lid for easy access when seated at

  dinette'  can be set as fridge or freezer only.

- LED lights inside and exterior, Dimmer or Remote Controlled possible.

- Camper electrics in 12V, 100AH AGM Battery VSR, Volt /Amp Meter / Water Tank Gauges,

  USB Double Power Point 5V 2.1A

- 240 V Power Inlet, RDC fused with 2 x Double Power Point (Australian or

  European Standards compliant and certified)

- 240V Charger for Interior Battery10A

- Porta Potti, Portable Toilet



Optional we recommend:

- Solar panel on roof Solbian CP 140W with BatteryManagement System or DC/DC charger

- Lithium battery system Lavi 80Ah or 130Ah, with readout on your phone via app.

- Hot Water Heat Exchanger System Elgena 15L with 12V or 240V Heater element

- Grey Water Tank System (compliant to leave no trace scheme)

- Outside Shower Hot/ Cold Water

- Foxwing Awning, 2.5m or any awning of your choice

- Bed on Dinette


The design of the conversion was engineered with minimal structural changes to the vehicle. The all over strength of the cabin is exceeding the standard vehicle.


Awning - can be also be fitted on the exterior of the roof collar.


To setup camp just undo the safety buckles and then easily lift the roof from the inside. You will enjoy extra open living space with minimal effort.


When it's time for a rest or bedtime, the bed is pulled rearwards and  the mattresses laid in position. Easily access to the bed is simple by stepping via the bench seat and kitchen bench.


The roof is constructed as an insulated sandwich, which is extremely stable and lightweight. The insulation reduces condensation and allows a cooler environment under the hot Aussie sun. 


Large flyscreened windows offer good cross flow ventilation and a comfortable living/ sleeping environment. Combined with the massive bed and thick mattresses,you're sure to enjoy a great nights sleep.


The size is staggering 1.45x2.10m, the foam mattresses 10cm respective, rear 8cm thick.


The bed can be easily lifted to access additional underneath storage. This storage is achieved by smart design, utilising the area between the original roof above the driver’s cabin and the bed system.


The water system is pressurised and two or three tanks can be optioned. One tank is fitted in the rear of the chassis and the other tanks are fitted into the cabinetry at floor level and are monitored by gauges.


The efficient LED lights are standard for both interior and exterior use. Various electric options are available and can be custom installed to suit your requirements and budget.


We recommend the Lithium batterie system, but can easily fit a standard AGM battery. Battery Management Systems, DC/DC charger etc. are available, we recommend Solbian CP solar panels.